Proctor Air: Revolutionising pitched roofing amidst climate change challenges.
Recent weather in the UK has shown the effects of Climate Change. The UK climate change projections programme (UKCP) shows that over the next half century, the UK is expected to experience:
- Warmer and wetter winters, and hotter drier summers.
- A higher frequency and intensity of extreme weather events, including torrential rain and heatwaves.
- Clearer skies in summer.
With this in mind, the construction industry must adapt. This includes roofing, which may need to relook at roofing traditional practices. Will metal sheets replace discontinuous covering such as slates and tiles? Is there a further argument for offsite roofing practices and can the underlay be used as a temporary cover, even in extreme weather? A lot of these questions will be answered by market demands but the underlay use as a temporary cover should be examined.
Good practice will dictate that the underlay should not be exposed for more than the time necessary to cover with the ultimate primary water shedding layer, normally slates or tiles. This is especially true if inclement weather is expected by the ever-increasing storm occurrences. This is even more emphasised in refurbishment work when the residents are still living in the dwelling, a polypropylene underlay of 0.6mm cannot be expected to offer the only protection from these severe storms. They are designed as secondary water shedding below the primary water proofing of slates or tiles.
Designers and users should be looking at membranes with a minimum 1m hydrostatic head of water when tested to BS EN 20811 as recommended in NFRC Technical Bulletin 6.
To summarise, use a roofing underlay that is designed to provide secondary water shedding attributes, minimum 1m head of water. Use an underlay with hydrophobic additive in all three layers. Keep the underlay exposure to a minimum and use a temporary cover (e.g. tarpaulin) over the underlay if extreme weather is expected.
A. Proctor Group’s new underlay Proctor Air meets this requirement and has a hydrophobic additive in all three layers to further give robustness against water penetration. This comes with a 15-year warranty.
More information on Proctor Air is available here https://proctorgroup.com/products/proctor-air
